Analysis of the cause of mold burst: 1. The mold material is not good, and it is easy to break in the subsequent processing 2. Heat treatment: deformation caused by improper quenching and tempering process 3. The mold grinding flatness is not enough, resulting in deflection 4. Design process: the st... read more
The mold is specific to the contact pair between the forming mold and the raw material or semi-finished product of the workpiece. Due to the huge difference between the molding load and the material to be formed, several measures are adopted to solve the problem of the workpiece strain, in addition ... read more
The hardness of the plastic mold is usually below 50-60HRC, and the heat-treated mold should have sufficient surface hardness to ensure that the mold has sufficient rigidity. Due to the filling and flow of plastic, the mold is required to bear large compressive stress and friction during work, and t... read more
Laminated molds are the leading technology in the development of plastic molds today, which can greatly improve production efficiency and equipment utilization, and save production costs and human resources. Advantages of Garbage bin mould 1) Compared with the conventional mold, the clamping ... read more
Keeping in mind the end goal to produce Cup mould any product from plastics, you'll have to do a procedure known as blow moulding. After that, to finish the moulding procedure, you'll have to utilize any one of the two available procedures, either Pet Preform Dies or potentially a plastic infusion h... read more