Will the harsh environment affect the quality of injection mold products?

The answer is certain. Start with the mold room of the injection mold factory. If the molds and other equipment in the mold room are arranged neatly, there is no oil on the ground and on the table, and everyone works in an orderly manner, then the molds it produces, from the perspective of the injection molding workshop, the injection molding machine is neatly arranged and exhausted. The equipment is well-equipped, the workshop is well ventilated, and there is no small amount of sundries such as oil on the ground. The equipment has been improved, and the injection department personnel operate safely in accordance with the rules. Bucket mould  rule. The wiring inside the mechanical equipment is neat and not exposed. The oil-sprayed silk-screen part has good ventilation facilities. The personnel in this part conduct regular monthly physical examinations and strictly abide by high-risk work operations. Chemical substances should be placed in a designated place and placed in a regular manner. , A special person is responsible for handling, and the merger is handled by a special person for local processing.

Although the above operations seem simple, they are not important, but they are very important for the products produced by the injection mold factory. Injection molds have become widely used materials in various fields. Mould has been serving the market with its reputation. Its quality is mainly reflected in six aspects. The following is a detailed and comprehensive introduction. Next, the number of work cycles that the mold can complete or the number of parts produced.

All front and back internal molds, inserts, rows, skewed tops, straight tops (push blocks), etc. must be processed on the bottom or side of the waist-shaped pit, and the data title and hardness must be engraved. Maintenance cost, cycle time, etc. Product quality: product dimension stability, compliance, product surface finish, product data utilization rate, etc. Before packaging the mold, it is necessary to spray a white and/or colorless rust inhibitor to the inner mold. The injection mold is not only of high quality, but also longer than other molds. It not only saves more customer costs, but also brings accurate user experience, thus saving you trouble, workload and professional safety guarantee.