What do you need to know about injection molds

Update:15-10-2020
Summary:

What do you need to know about injection molds? Check i […]

What do you need to know about injection molds? Check it out!

The injection mold is composed of a movable mold and a fixed mold. The movable mold is installed on the movable template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine. crate mould During injection molding, the movable mold and the fixed mold are closed to form a pouring system and cavity. When the mold is opened, the movable mold and the fixed mold are separated to take out the plastic product.

Although the structure of the mold may vary widely due to the variety and performance of plastics, the shape and structure of plastic products, and the type of injection machine, the basic structure is the same. The mold is mainly composed of a pouring system, a temperature control system, forming parts and structural parts. Among them, the pouring system and molded parts are the parts that are in direct contact with the plastic and change with the plastic and the product. They are the most complicated and the most variable parts in the plastic mold, requiring the highest processing finish and precision.

The gating system refers to the part of the runner before the plastic enters the cavity from the nozzle, including the main runner, cold material cavity, runner and gate, etc. Molded parts refer to the various parts that constitute the shape of the product, including movable molds, fixed molds and cavities, cores, molding rods, and vents.